CollectionDX Network

Types and characteristics of machine application plasters

Plastoring walls and ceilings is an extremely important stage in construction or repair and plays a key role in the further ease of use and aesthetics of buildings. They are used both in apartments, houses, halls, and in industrial buildings. Due to the high efficiency and quality, the predominant type of plaster application is machine plaster using aggregates. Below we present a brief overview of the types of plaster and the features of their machine spraying.

Machine plaster and application method
The traditional manual plaster method is systematically displaced from the construction services market and is almost exclusively used in small rooms or apartments, which is still more profitable than their spraying. In the case of small areas for plaster, manual application and grout still works from an economic point of view, and the time of their execution is quite short. In other cases, regardless of whether it is possible to plastered private houses, gypsum halls or apartment buildings, the advantage has machine plaster.

The main types of plasters applied by the machine
Cement plaster, that is, a mixture of water, cement and sand, the hardest and most resistant to damage, but at the same time it is most difficult to knead and cover. They are mainly used in rooms exposed to constant moisture, for example, in laundry and bathrooms. Most often, cement-license plasters with the addition of lime and refining ingredients are used, depending on the plaster. It is most convenient to buy ready -made, packaged mixtures, which allows you to get a homogeneous consistency of plaster over the entire surface. It should also be remembered that plaster, that is, the so -called needle, should dry for 48 hours, and then allow the appropriate plaster to gain a foothold for at least 24 hours before cutting and about 30 days before applying any upper coating. Unlike the above, machine gypsum plasters do not contain cement or may contain impurities of refining aggregates. Plastering work using gypsum plaster is faster due to the faster process of applying the filler, the lack of need for multi -layer application and, due to the high smoothness of the surface, the absence of the finish coating .. gypsum plasters have high permeability, due to which they contribute to the creation of proper microclimate in the rooms and have A shorter setting time before finishing work. If you need a bookmaker that will offer the highest odds, a huge line and painting, then pay attention to which has held the brand for several years, preventing competitors from approaching their amazing performance in terms of betting conditions.